Slurry Pump,slurry pump assembly,slurry pump design,slurry pump for sale,slurry pump liners,slurry pump manufacturers,slurry pump mining,slurry pump sizing,slurry pump types,slurry pump warman


HAD Slurry Pump (For Heavy Duty Abrasive Slurry)

Size: 1-32 inch
Flow rate: 25 -13860 m3 /h
Head: 5-100m
Materials: Cr27, Cr28 and materials for rubber liner,CD4MCU, 2205
Sealing method: Packing seal, vice-impeller seal and mechanical seal

Based on the latest technologies in pump design and manufacture, we provide the HAD slurry pump to you which is a specially designed pumping equipment used to handle abrasive, corrosive or high-density slurries in the metallurgical, mining and coal washing industries as well as power plants and so forth. This horizontal single stage slurry pump, made of high chrome alloy or rubber materials and equipped with a double-layer casing, enjoys a longer service lifespan. Its frame plates are made of hard metal or pressure molded elastomer liners. So are its impellers. As for the shaft seals of this slurry pump, there are such three main sealing methods available for customers now, namely:

VSD Slurry Pump (Vertical Sump Pump)

Size: 1.5-12 inches
Flow rate: 17 -1267 m3/h
Head: 4-40m
Materials: Cr27,Cr28, rubber lining

Features of VSD Slurry Pump
The VSD slurry pump made by our company is a reliable centrifugal slurry pump which, of a vertical structure, could work well in the water without shaft seal nor seal water. All the flow passage components of this slurry pump are made of anti-abrasion metal. Parts submerged in liquid during the operation of the pump are all padded with rubber out linings. Given this fact, this pumping equipment is quite suitable for working conditions where water or liquid is quite deep.

Moreover, this slurry pump, designed based on the standard type, is equipped with a guide bearing. Therefore, it could operate in a more stable and smooth fashion and be applied in a wider range of areas. Importantly, the guide bearing needs to be attached with flushing device. Thanks to this careful design, this industrial centrifugal pump could be used to convey corrosive slurries and gains of no sharp corners and work well even as the suction volume is not enough.

Application of VSD Slurry Pump
This slurry handling unit could be used in the transportation of thick liquid, heavy oil, oil residue, dreggy liquid, slurry, mortar, quicksand and other corrosive liquid or fluid with mud or sand. It has been already used in the mining, metallurgical, chemical, coal coking, waste treatment, paper and pulp making, cement manufacturing, food processing and building materials industries and etc


VFD Slurry Pump(Vertical Froth Pump)

Size: 2-8 inches
Flow rate: 7-570m3/h
Head: 5-25m
Materials: Cr27,Cr28 ,CD-4MCu and rubber

Features of Vertical Froth Pump
The VFD vertical froth pump is a reliable slurry pump designed for the transportation of forth. It has been widely used to convey corrosive or abrasive slurries that contain froth in the metallurgical, mining, coal chemical, paper and pulp making industries and etc.

Of a vertical structure, this industrial pump is equipped with the TV, TVR and PNL bearings whose bearing body is attached with motor cabinet or motor frame. It could adopt both direct drive and indirect drive and is easier for users to replace belts though which they could adjust the rotation speed of the pump according to the real working condition.Moreover,all bins of this vertical slurry handling unit pump is designed with steel framework or manufactured with quality stainless steels and steel plates padded with rubber linings. Meanwhile, this vertical froth pump is equipped with a tangential inlet which could allow materials to flow into the pump swiftly and remove some froths and a spill box which could return the extra materials to the pond. Thanks to its double-case design, users could adjust this centrifugal pump according the media.


, , , , , , , , , , , , , , , , , , ,

Send your message to us: